Marblehead ★★★ North Shore ★★★ Open 24 Hours
GloverChimney Sweep & Repair
(781) 745-3853

Free estimates on chimney & brick repair

Chimney Repair & Masonry in Marblehead, MA

From a routine sweep to rebuilding a chimney that has stood for two centuries. Call day or night to reach an independent local chimney and masonry contractor on the North Shore.

Free estimates. Line open 24 hours, 7 days a week.

Brush being run into the top of a chimney flue Trowel pressing fresh mortar into chimney brick joints Chimney cap being set in place
An old brick chimney being looked over

Older chimneys

Chimneys Built Before the Revolution Need a Different Approach

Marblehead's old town is full of houses from the 1700s. Their chimneys were not built the way chimneys are built today, and repairs have to respect that.

Several flues, one stack

A large central chimney often serves three or four fireplaces. Each flue has its own condition and has to be judged separately.

Soft brick, lime mortar

Brick made two hundred years ago is softer than modern brick. Hard Portland cement mortar can crack it, so repairs call for a softer, lime-based mix.

No liner at all

Many early flues are bare brick inside. Before a fireplace or stove is put back into use, most need a stainless liner.

Past repairs

Generations of patching leave a mix of mortars, tar and odd bricks. Finding what is sound usually comes first.

Repair or rebuild

Three Levels of Brick Repair, and How to Tell Them Apart

A contractor should be able to say which one your chimney needs, and why. Here is what each means.

Option 1

Repoint

The bricks are solid. Only the mortar between them has worn back or cracked.

Least disruption. Scaffolding or a roof ladder, a few days at most.

Option 2

Rebuild the top

Bricks above the roofline are loose, flaking or leaning, but the stack is sound lower down.

The chimney is taken down to good brick and relaid from there, with a new crown.

Option 3

Rebuild in full

Cracks run through the stack, it has pulled away from the house, or the flue inside has failed.

A larger job that may need a permit. Ask who handles the paperwork.

How the Free Estimate Works

  1. Call

    Dial (781) 745-3853 whenever the problem shows up. The line never closes.

  2. Connect

    You are put through to an independent chimney and masonry contractor serving your town.

  3. Estimate

    Ask for a free estimate with the work and the price written down.

  4. Hire

    If you are happy with it, you hire that contractor yourself.

Hiring tips

Six Questions to Ask Before You Hire

Contractors reached through this site are independent businesses. Checking their credentials is up to you, and a good one will answer all six without hesitation.

  1. Are you licensed and registered for this work in Massachusetts, and can I see it?
  2. Can you send me your certificate of insurance?
  3. Will I get the scope of work and the price in writing before you start?
  4. What mortar will you use, and will it match my brick?
  5. Who pulls the permit if one is needed?
  6. What warranty do you give on the work, and is it in writing?
Flashing being fitted against chimney brick

Towns

Marblehead and the North Shore

Marblehead ★ Swampscott ★ Salem ★ Lynn ★ Nahant ★ Peabody ★ Beverly ★ Danvers ★ Saugus ★ Manchester-by-the-Sea

Glover Chimney Sweep & Repair50 W Shore Dr, Marblehead, MA 01945
Open 24 hours
(781) 745-3853  |  View on map

Q&A

Straight Answers

What does an estimate cost?
Nothing. Describe the problem and ask the contractor for a price; estimates are free. If you need a formal chimney inspection with a written report, for a house sale or an insurance claim for example, that is a separate service and there is a fee for it.
Can an antique chimney be used safely?
Often yes, once it has been checked and lined. An unlined brick flue with gaps in the mortar can let heat and smoke reach the wood framing around it. Have it looked at before the first fire.
Why is there white powder on my chimney?
It is salt left behind when water passes through the brick and evaporates. The powder itself is harmless. The water that carried it is the problem, and its entry point needs to be found.
When is the best time for brick repairs?
Late spring to early fall. Mortar needs mild, frost-free weather to set. Urgent leaks and safety problems can be dealt with at any time of year.
How long does a sweep take?
Usually about an hour for one flue. A flue with heavy, glazed creosote or a blockage takes longer.
Is the phone answered overnight?
Yes. The line is open 24 hours a day, including weekends and holidays. Ask the contractor how soon they can be there. If you have a chimney fire or a carbon monoxide alarm, get out and call 911.
Is Glover Chimney Sweep & Repair the company that does the repair?
No. Glover Chimney Sweep & Repair is a free service that connects homeowners with independent local contractors. It is not a contractor, does not carry out the work and does not warrant or guarantee it. The contractor you hire sets the price and is responsible for the job.
Do you cover my town?
Contractors reached through this line work in Marblehead, Swampscott, Salem, Lynn, Nahant, Peabody, Beverly, Danvers, Saugus and Manchester-by-the-Sea. For anywhere else on the North Shore, call and ask.

Free Estimate, Any Hour

Leaking, crumbling, smoking or just overdue for a sweep. Call and talk to a local chimney and masonry contractor.

(781) 745-3853
Tap to call(781) 745-3853